SUNFOUNDER Plus Power Module for Raspberry Pi 3 2

December 2023   Sunfounder  

SUNFOUNDER Plus Power Module for Raspberry Pi 3 2 Model B & RPi 1 Model B+, Easy Seamless Supply Switching A power module especially designed for Raspberry Pi, which enables the Pi to be used in a moveable manner. Powered by two 18650 Li-ion batteries, able to supply the Raspberry Pi with a steady 5V by the XL1509 step...

September 2023   Sunfounder    

SUNFOUNDER Lithium Battery Pack Expansion Board Power Supply with Switch for Raspberry Pi 3 Model B, 2 Model B And 1 Model B+ Banana Pi 3800mAh 5V/1.8A A power module especially designed for Raspberry Pi, which enables using the Raspberry Pi in a moveable manner Battery capacity: 3800mAH (maximum); Output current: 1.8A...

November 2023   Sunfounder    

SUNFOUNDER Breadboard Power Supply Solderless Module for Arduino And Raspberry Pi, MB102 3.3V 5V Compatible with Uno R3 Mega2560 Nano Raspberry Pi 3, 2 Model B & Raspberry Pi 1 Module B+ A convenient power module supplying especially an MB102 breadboard, supporting 5 V or 3.3 V output. Input voltage: DC 6.5-12 V. Output...

August 2024   Sunfounder    

SunFounder 3.5" 480*320 Touch Screen TFT LCD Display Monitor for Raspberry Pi 3, 2 model B and Raspberry Pi 1 model B+ 3.5 Inch Touch Screen Monitor with high definition, designed for Raspberry Pi. 480 x 320 resolution ratio, supports touch control. Compatible with all models of Raspberry Pi. Same size as the Raspberry...

September 2023   Sunfounder    

SUNFOUNDER Black ABS Cases for Raspberry Pi 3 Model B+ 3B 2B B+ With the special designed layout for Raspberry Pi, SunFounder Black ABS case can perfectly fit your Raspberry Pi 3 Model B+, 3 Model B, 2 Model B & 1 Model B+ Ports Full Access-Access to All ports and wall Mountable, perfectly fit your pi components More Protetable...

September 2023   Sunfounder    

SUNFOUNDER Breadboard Kit RAB Holder, 830 Points Solderless Circuit Breadboard, Jumper Wires, LED, Resistors compatible with Arduino R3 MEGA & Raspberry Pi 4B, 3B+ Model B, 2B and 1B+ The Sunfounder breadboard kit is compatible with Arduino R3 or Mega and Raspberry Pi 4B 3B+, 3 Model B, 2 Model B and 1 Model B+ The high...

September 2023   Sunfounder   Na    

SUNFOUNDER Premium Black Case ABS for Raspberry Pi 3, 2 Model B And Raspberry Pi 1 Model B+ with External Fan Protective Case - This is a protective case for Raspberry Pi, it provides excellent protection, with fashional appearance. Heat Dissipation - With a external fan attached which can cool the hardware. Durable Meterial...

October 2023   Sunfounder    

SUNFOUNDER Button Module for Arduino And Raspberry Pi A button module using a button of 12x12x5 mm size Working voltage: DC 5V Output digital signals; with 3-pin anti-reverse cable included PCB size: 2.0 x 2.0 cm With power light and indicator of digital signal output...

August 2023   Sunfounder    

SUNFOUNDER 37 Modules Sensor Kit V2.0 for Raspberry Pi RPi 1 Model B, 26-Pin GPIO Extension Board Jump Wires A brand new Sensor Kit V2 for Raspberry Pi 1 Model B, compatible with Raspberry Pi 2, with the freshly-rewritten User Manual provided for you to easily learn this NEW kit as well as Raspberry Pi User Manual in this...

November 2023   Sunfounder    

SunFounder Basic Sensor Kit for Raspberry Pi 3, 2 and RPi 1 Model B+, 40-Pin GPIO Extension Board Jump wires - Including 91 Page Instructions Book This is the updated Sensor Kit for Raspberry Pi 3, 2, Model B+, developed specially for those beginners who are interested in Raspberry Pi. A complete set of Raspberry Pi most...

October 2023   Sunfounder    

SUNFOUNDER GPIO Extension Board T Shape Cobbler Breakout for Raspberry Pi 3, 2 Model B & RPi 1 Model B+, with 40 Pins Ribbon Cable A T-shape Extension Board which extends the pins of Raspberry Pi and can be directly plugged into a breadboard. Separate UART pins, convenient for logging into the Raspberry Pi by serial port...

October 2023   Sunfounder    

SUNFOUNDER 2 Channel Relay Module DC 5V Power Supply Relay Board with Optocoupler High Level Triger Compatible with Arduino And Raspberry Pi This is a 5V 2-Channel Relay interface board, each one needs 15-20mA Driver Current As a HIGH level trigger relay, it is built with indicator LEDs showing working status, supporting...

August 2024   Sunfounder    

SUNFOUNDER 10.1'' IPS Monitor - Raspberry Pi 10.1 Inch HDMI IPS LCD Monitor Display High Resolution 1280×800 Camera Holder Stand for Raspberry Pi 3 Model B, 2 Model B, and 1 Model B+ (10.1'' Display) The 10.1 inch IPS LCD Monitor with high resolution of 1280×800 pixels supports key operation and remote control. The IPS...

October 2023   Sunfounder    

SUNFOUNDER Joystick PS2 Module for Arduino And Raspberry Pi A Joystick PS2 module with two lines of analog output (X, Y) and one of digital output (Z). Works with Arduino With power light and indicator of digital signal output Working voltage: DC 5V PCB size: 2.0 x 2.0 cm...

September 2023   Sunfounder    

SUNFOUNDER Photo-Interrupter Sensor Module for Arduino And Raspberry Pi Support quick response; highly sensitive Provide a peak wavelength of 940nm With power light and signal output indicator and 3-pin anti-reverse cable PCB size: 2.0 x 2.0 cm Working voltage: 3.3-5V...

November 2023   Sunfounder    

SUNFOUNDER Photoresistor Light Sensor Module for Arduino And Raspberry Pi A photoresistor module of which the resistance decreases with increasing incident light intensity Sensitive to ambient light conditions; so it is generally used to detect the light intensity in the surroundings, trigger MCU or relay module, etc.

October 2023   Sunfounder    

SUNFOUNDER Tilt Switch Module for Arduino And Raspberry Pi A tilt switch to detect inclinations of a small angle Use a ball switch with bidirectional conduction Working voltage: 3.3-5V; PCB size: 2.0 x 2.0 cm With power light and indicator of digital signal output A 3-pin anti-reverse cable included...

February 2021   300    

Raspberry Pi 3 Model B or Raspberry Pi 3 Model B; Raspberry Pi 3 Model B or Raspberry Pi 3 Model B Plus Board + ABS Case + Power Supply Mini PC Pi 3B/3B+ with WiFi&Bluetooth...

September 2020   300    

SunFounder RAB Raspberry Pi 3 Holder 5 in 1 Base Plate Case for Raspberry Pi 3B+,3 Model B, 2 Model B+ For Arduino...

August 2024   Sunfounder    

SunFounder Raspberry Pi 2.4 Inch TFT Screen LCD Display HAT Extension Board 320x240 for Raspberry Pi 3/2/B+ 2.4 inch screen nearly fully covers the HAT expansion board, providing maximum display area with portability. Supports a resolution of 320x240; Works with Raspberry Pi B +, Pi2 and Pi3. Size: 65mm × 56.5mm, fits...

July 2024   Sunfounder    

SUNFOUNDER Passive Buzzer Sensor Module for Arduino and Raspberry Pi Un cicalino passivo che richiede segnaletica quadrata da 2 a 5 k, per esso non è costruito in oscillazione sorgente, e quindi rende suoni quando energizzato Use an S8550 PNP transistor for drive Controllable sound frequency - it can make the buzzer beep...

July 2024   Sunfounder   Tft28 Touch Shield    

SUNFOUNDER 320x240 2.8" Assembled TFT Touchscreen Display LCD for Raspberry Pi Link to download the instructions https://www.adrive.com/public/G4HaJB/Ras pberry%20Pi%202.8%20TFT%20Touchscre en.pdf It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface...

March 2024   Sunfounder    

SUNFOUNDER Reed Switch Module for Arduino And Raspberry Pi A reed switch module to detect the magnetic field. Different from Hall sensors which are generally used to measure the speed of intelligent vehicles and count assembly lines, reed switches are often used to detect whether there is a magnetic field Use a normally...

December 2023   Sunfounder    

SunFounder MQ-2 Gas Sensor Module for Arduino and Raspberry Pi An MQ-2 gas sensor module that outputs an analog value when sensing combustible gas. The higher concentration of the gas is, the greater value it will output. When the value exceeds the threshold set, the signal indicator will light up. High sensitivity to liquefied...

December 2023   Sunfounder    

SUNFOUNDER Switch On off Module Single Pole Double Throw for Arduino And Raspberry Pi A switch module to turn on/off the power A single-pole double-throw switch Super wide working voltage Standard double-sided printed circuit board, 3-mm holes at two corners for easy fixing PCB size: 2.8 x 3.4 cm...

November 2023   Sunfounder    

SunFounder 7" IPS Display Panel Monitor 1024×600 HD LCD Audio HDMI/VGA/NTSC/PAL Screen with Case and Stand for Raspberry Pi 3, 2 Model B and 1 Model B+/A+/B Kano The 7 inch IPS LCD Monitor with high resolution of 1024×600 pixels supports key operation and remote control The IPS screen features the wide visual angle, fast...

November 2023   Sunfounder    

SUNFOUNDER AD/DA Converter PCF8591 Sensor Module for Arduino And Raspberry Pi Support acquisition of external 4-line voltage inputs (ranging 0-5v), with a single power supply Standard double-sided printed circuit board, 1.16mm thick, with an elegant layout, 3-mm holes at each corner for easy fixing Use an 8-bit successive...

October 2023   Cqrobot   Wrl-10822    

CQRobot Raspberry Pi RTC Real Time Clock Module - Compatible Raspberry Pi 3, Use I2C Communication Mode, Onboard DS1307 Clock Chip And a 1220 Coin Cell Battery. http://www.cqrobot.wiki/index.php/Ra spberry_Pi_RTC_Real_Time_Clock_ Module-Compatible_Raspberry_Pi _3-CQR0386 This module is designed specifically for the Raspberry...

October 2023   Sunfounder    

SunFounder 37 moduli Raspberry Pi Sensor Kit, 26-pin GPIO estensione Board Jump Wires This is the new Sunfounder 37 sensor Starter Kit, developed specially for those beginners who are interested in Raspberry Pi. A complete set of Raspberry Pi most common and useful electronic components. Detailed tutorial including project...

September 2023   Sunfounder    

SUNFOUNDER TB6612 1.2A DC Motor Driver Module for Arduino or Raspberry Pi Smart Car Robot Uses the TB6612FNG motor driver chip with a maximum output current of 1.2A. Firm and convenient wiring, with anti-reverse port for both motor connection and signal input. Simple control: control two motors simultaneously - MA and MB...

September 2023   Sunfounder    

SUNFOUNDER High Precision BMP280 Barometric Pressure Temperature Altitude Sensor Module Support I2C or SPI for Arduino And Raspberry Pi The module detects the ambient temperature, air pressure and altitude of the current position. Features a compact size, high accuracy, analog values and long-term stability. Low power consumptio...

August 2023   Aukru    

Aukru Raspberry Pi 3 Model B/Raspberry Pi 3 Model B+ Power Supply Adapter 5V 3A Micro USB Charger with On off Power Switch Micro USB alimentatore 5V 3000ma con interruttore pulsante per Raspberry Pi 3 / Pi 2 Modello B / B + (B plus) Uscita: 5V, 3000ma max, compatibile con 2500ma, 2000ma, 1500ma e 1000ma Ingresso: 100-240V...

October 2023   Geekworm    

Geekworm mSATA SSD Adapter X857 Expansion Board USB3.0 Module for Raspberry Pi 4 Model B 8GB / 4GB / 2GB 【Important Note】Pls format the new SSD before use. 【Raspberry Pi 4 mSATA Shield】X857 V2.0 mSATA Adapter for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), UASP supported, NOT support TRIM 【How to Power】√ Model 1. power via...

October 2023   Sunfounder    

SUNFOUNDER Infrared Sensitive IR Receiver Sensor Module for Arduino And Raspberry Pi An infrared receiver module that uses a 1838b highly sensitive IR receiver Low cost, wide-angle, and long-distance receiving Output levels compatible with TTL and CMOS level, activated by low level With power light and indicator of digital...

September 2023   Sunfounder    

SUNFOUNDER Super Starter Learning Kit V3.0 for Raspberry Pi 3, 2 Model B & 1 Model B+, Including 123-Page Instructions Book for Beginners This Super Kit provides tutorials to learn about Raspberry Pi, suitable for beginners and experienced hobbyists. Detailed user manual provided includes 17 funny experiments with elaborate...

September 2023   Sunfounder    

SunFounder Ultrasonic Module Distance Sensor SF-SR02 for Arduino UNO MEGA R3 Mega2560 Duemilanove Nano Robot Rapsberry Pi 3, 2 & RPi Model B+ XBee ZigBee,2cm-700cm An ultrasonic module with a detecton range of 0.79 inch-275.6 inch; signals detected are stable within 196.85 inch, grow weaker beyond 196.85 inch and at last...

August 2023   Sunfounder    

SUNFOUNDER Potentiometer Module for Arduino And Raspberry Pi A precision potentiometer that is adjustable 3-pin anti-reverse cable included With an adjustment cap on the potentiometer Working voltage: 5V; PCB size: 2.0 x 2.0 cm adjustable range: 0 - 10K...

August 2020   300    

SunFounder Smart Video Car Kit V2.0 for Raspberry Pi 4 Model B 3B+ 3B 2B Electronic Toy with Detail Manual...

August 2020   300    

Raspberry Pi 3 Model B or Raspberry Pi 3 Model B Plus Board + ABS Case + Power Supply Mini PC Pi 3B/3B+ with WiFi&Bluetooth...

September 2023   Sunfounder    

SUNFOUNDER LCD1602 Module with 3.3V Backlight for Arduino Uno R3 Mega2560 Raspberry Pi 16x2 Character White on Blue Background Display 2 lines of 16 characters including letter, number, and symbol Working voltage: 5V; contrast adjustable with a 50K potentiometer onside Module dimensions: 80 x 36 x 12 mm; Viewing area...